(update: 6/24 - very limited stock left. Order now to avoid the long wait till next batch)

Break Free To Use Professional Motion Software For The Experts!

1 x Thanos AMC-AASD15A controller
4 x Actuators with 150mm stroke distance
4 x 90ST-M02430 MiGE motors

Absolutely everything you need in one basket....

Professional Motion Controller
- Thanos AMC-AASD15A
- Full metal enclosure (no need to 3D print)
- RGB display, RJ45 accessory port
- Up to 7 axis (2DOF, 3DOF, Traction Loss, Surge, Active Belt)
- E-Stop button in lightweight aluminum enclosure
- compatible with SimRacing Studio, SimTools, FlyPT Mover

CNC Service and Parts:
- Aluminum Profile, standard 100 series
- Motor bracket in Aluminum
- Fixed Bearing bracket in Aluminum
- Linear Bearing bracket in Aluminum
- Glider in Polyacetal
- all aluminum parts are sandblasted and beautifully anodized

Each actuator is supplied with:
- 90ST-M02430 Motor (genuine MiGE motors)
- AC Servo Driver (AASD-15A)
- Shielded data cables for encoder (4m)
- Shielded power cables for motor (4m)
- Shielded DB25 cable for controller (1m)

All mechanical parts, nuts and bolts included:
- Shaft Coupler
- Fixed Bearing
- Ball Screw & Nut
- Linear Bearing
- Hollow Shaft
- Heavy duty anti vibration rubber feet

See some of our customers around the world!

Notes:

Absolutely No 3D-printing required!!!

Thanos controllers is V1.4 with color screen and accessory port. We get them directly from PT Actuators. We check them (fix "Reset Trace" cut if required), set them up for 3DOF, and test them to make sure they are in prefect condition before shipping. All subsequent support will be thru Thanos Discord channel)

Aluminum Profile: ERL 100100-b, are ready to bolt, no screw thread tapping required

Email custom designs to info@eRacing-Lab.com for CNC machining work

Gross Weight for shipping: 63KG

IMPORTANT SHIPPING INFO:
Due to COVID19 situation, exact shipping cost will be confirmed via email
NO PAYMENT is captured upon check out
Payment is captured only after customer confirms via email.
(or just message us with shipping address via the green button below)

Check out our Resources and Compatibility page for more information.

Estimated DIY build time: about 2-3 hours for all 4 actuators!!!
You'll need to have the right size screw drivers, hex keys, and at least know how to tighten and loosen screws when required.

Key features for the ERL100100-b aluminium profile:
1) Precision CNC machined screw thread . No need to manually tap thread inserts / Helicoils and risk any damage.

2) thicker internal pattern provides ultimate stiffness. It also allows the use of even bigger screws (included!), which makes the whole actuator even more solid.

News Update

2nd customer in 🇨🇱, and customer in 🇮🇳orders his 2nd DIY MEGA+

Aero grade aluminum. Beautifully anodized 🖤❤️